09-23-2014, 08:48 AM | #1 |
Senior Member
Join Date: Jun 2014
Posts: 163
|
Heavy Core Return GM core id # help?
what do you guys use for heavy core core id#? I know on the light duty you put the tag # and heavy does not take one so what do you use for it to accept it?
|
09-23-2014, 10:27 AM | #2 |
Senior Member
Join Date: Oct 2012
Posts: 236
|
you still enter the number from your green tag like you do with light cores. The PDC will send you specific labels within 2-3 days to put on the cores. I just hang on to the green tag until they show up and then toss them
|
09-23-2014, 10:51 AM | #3 |
Senior Member
Join Date: Jun 2014
Posts: 163
|
thanks
thanks man
|
12-02-2014, 03:17 PM | #4 |
Member
Join Date: Nov 2011
Posts: 35
|
Per policy and procedures manual you can just enter random numbers like 11111111 or 22222222 but not 00000000.
|
03-20-2015, 01:20 PM | #5 |
Senior Member
Join Date: Oct 2012
Posts: 122
|
I use the part number as the heavy core id #.
|
03-23-2015, 10:16 AM | #6 |
New Member
Join Date: Jun 2012
Posts: 25
|
We don't usually have too many, so i use the RO# on ours.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
heavy core | matracy | Parts | 7 | 09-25-2014 10:21 AM |
CSO Return | JABest | Parts | 1 | 06-23-2014 11:22 AM |
Wpc return core reimbursement | Deniset | Parts | 3 | 09-17-2012 12:22 PM |
Core Transfer | handyman58 | Parts | 1 | 08-23-2012 01:32 PM |
Parts Return | gingersnap | Parts | 4 | 10-26-2010 05:26 AM |