Go Back   DealershipForum.com > Domestic Franchises and Independent Dealers > General Motors > Parts


Thread Tools Display Modes
Old 09-06-2017, 01:34 PM   #1
Senior Member
Join Date: Jun 2014
Posts: 159
Default Key blank length

Anybody have any trouble with the old key blank 15026223 being shorter than the new# 23372321....we are out of stock on the old # and the new # seems to be a longer length and is causing problems on my key cutter which is a PC+ from Barnes, just curious if anyone else has run into this issue or something similar?
InBloom94 is offline   Reply With Quote
Old 09-19-2017, 07:02 AM   #2
Senior Member
Join Date: Oct 2012
Posts: 122

we use the PC + flash and have had no issues with cutting these keys.
TORGY is offline   Reply With Quote
Old 10-19-2017, 08:54 AM   #3
New Member
Join Date: Jan 2016
Posts: 17

Watch if your GOLD cassette is worn because the key can actually go under the key stop allowing it to go into to far. We found a similar problem and making sure the key goes in straight is important. If the head of the key is elevated slightly it will cause problems.
BCCParts is offline   Reply With Quote
Old 11-02-2017, 11:13 AM   #4
New Member
Join Date: Aug 2017
Posts: 4

tfw my RED cassette allows keys to slip diagonally, and you have to get a second pair of hands to hold the springs open to get it back out...
Stoferin is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -7. The time now is 09:15 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright DealershipForum.com - 2008 - 2016