|
09-06-2017, 01:34 PM | #1 |
Senior Member
Join Date: Jun 2014
Posts: 163
|
Key blank length
Anybody have any trouble with the old key blank 15026223 being shorter than the new# 23372321....we are out of stock on the old # and the new # seems to be a longer length and is causing problems on my key cutter which is a PC+ from Barnes, just curious if anyone else has run into this issue or something similar?
|
09-19-2017, 07:02 AM | #2 |
Senior Member
Join Date: Oct 2012
Posts: 122
|
we use the PC + flash and have had no issues with cutting these keys.
|
10-19-2017, 08:54 AM | #3 |
New Member
Join Date: Jan 2016
Posts: 17
|
Watch if your GOLD cassette is worn because the key can actually go under the key stop allowing it to go into to far. We found a similar problem and making sure the key goes in straight is important. If the head of the key is elevated slightly it will cause problems.
|
11-02-2017, 11:13 AM | #4 |
New Member
Join Date: Aug 2017
Posts: 4
|
tfw my RED cassette allows keys to slip diagonally, and you have to get a second pair of hands to hold the springs open to get it back out...
|
|
|