-   Parts (
-   -   Key blank length (

InBloom94 09-06-2017 01:34 PM

Key blank length
Anybody have any trouble with the old key blank 15026223 being shorter than the new# 23372321....we are out of stock on the old # and the new # seems to be a longer length and is causing problems on my key cutter which is a PC+ from Barnes, just curious if anyone else has run into this issue or something similar?

TORGY 09-19-2017 07:02 AM

we use the PC + flash and have had no issues with cutting these keys.

BCCParts 10-19-2017 08:54 AM

Watch if your GOLD cassette is worn because the key can actually go under the key stop allowing it to go into to far. We found a similar problem and making sure the key goes in straight is important. If the head of the key is elevated slightly it will cause problems.

Stoferin 11-02-2017 11:13 AM

tfw my RED cassette allows keys to slip diagonally, and you have to get a second pair of hands to hold the springs open to get it back out...

All times are GMT -7. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright - 2008 - 2016